iSEVEN Flex RM7
Designed for users whose space constraints do not allow for the installation of rack series iSEVEN (RI7) with welded construction.
The iSEVEN Flex RM7 racks was designed for users whose space constraints do not allow for the installation of rack series iSEVEN (RI7) with welded construction. These racks are known for their unmatched balance between price, utility value, and quality. The iSEVEN Flex racks are delivered unassembled for easy transportation to the installation site where they can be built quickly and easily.
This type of rack is the ideal choice for installers and end-users who want to spend less time choosing between various options and configuring difficult product part numbers. After thorough research, we have prepared for you a list of the most common sizes that fit one universal design.
The iSEVEN Flex enclosure is ideal for network equipment rooms, telecommunication closets, and computer rooms when special configurations for load ratings, cable entries, or door/panel options are not critical. The number of options is balanced by a highly competitive price and excellent availability.
MAIN ADVANTAGES:
- Universal rack for standard daily use
- Unassembled version for transport to inaccessible spaces
| Parameter | Value |
|---|---|
| Height | 21, 27, 42, 45U |
| Width | 600 or 800 mm |
| Depth | 600, 800, or 1 000 mm |
| Construction | Robust frame construction joined together with M6 screws, easy and quick assembly, delivered unassembled; assembly at the installation site |
| Load rating | 800 kg |
| Doors | 2 types of doors (type G or S) for front and rear installation and 1 type of rear panel, door opening angle 180°, can be easily changed to open on right or left, swivel handle lock – DIN profile, universal key 333 |
| Side panels | Easily removable with lock |
| Top and bottom plates | Holes for ventilation unit and cable entries. The number of holes depends on the selected footprint |
| Extrusions | 2 pairs of sliding 19" L-type extrusions |
| IP rating | IP30 |
| Colors | RAL7035 a RAL9005 |
| Standard configuration |
Top and bottom covers, 4 columns 2 pairs of 19" sliding vertical extrusions 2 or 3 pairs of vertical extrusion holders Front door with swivel handle lock—DIN profile, universal key 333, and safety glass (EN 12150-1) Removable rear panel with knock-out cable entry and lock 1 pair of sheet steel side panels with locks 4 adjustable feet, GND/earthing kit 28× mounting kits |
| Information | Rack is delivered unassembled inboxes |
iSEVEN-Flex-RM7_datasheet_CONTEG-20230419_en.pdf
File size: 2255 kB
ASSEMBLY_AND_OPERATING_MANUAL_iSEVEN_Flex_RM7.pdf
File size: 4904 kB
iSEVEN-Flex-RM7_datasheet_EN_20210812.pdf
File size: 835 kB
Stencils
rm7v2000.zip
File size: 4326 kB
iSEVEN_Flex-RM7-42-80_80-H_main-web.jpg
File size: 259 kB
iSEVEN_Flex-RM7-42-80_80-H_main-opened-web.jpg
File size: 305 kB
iSEVEN_Flex-RM7-42-80_80-H_top-web.jpg
File size: 366 kB
iSEVEN_Flex-RM7-42-80_80-H_wide-web.jpg
File size: 475 kB
iSEVEN_Flex-RM7-42-80_80-H_bottom-web.jpg
File size: 496 kB
iSEVEN-Flex-RM7_RM7-42-80_100-X.jpg
File size: 185 kB
iSEVEN_RM7-42-80_100-front-right-web.jpg
File size: 89 kB
iSEVEN_RM7-42-80_100-right-back-two-web.jpg
File size: 76 kB
iSEVEN_RM7-42-80_100-right-back-web.jpg
File size: 71 kB
iSEVEN_RM7-42-80_100-back-right-web.jpg
File size: 86 kB
iSEVEN_RM7-42-80_100-left-front-two-web.jpg
File size: 91 kB
iSEVEN_RM7-42-80_100-handle-hinges-web.jpg
File size: 204 kB
iSEVEN_RM7-42-80_100-from-inside-top-web.jpg
File size: 211 kB
iSEVEN_RM7-42-80_100-from-inside-extrusions-web.jpg
File size: 253 kB
iSEVEN_RM7-42-80_100-from-inside-bottom-web.jpg
File size: 240 kB
iSEVEN_Flex-RM7-42-80_80-H_main-splitdoors.jpg
File size: 313 kB
Catalog
Product Catalog—Data and Telecommunication Solutions and Racks
File size: 24466 kB
Brochure—Complete Solutions for Datacenters
File size: 3003 kB
Brochure—Solutions for Server Rooms and Cabling Installations
File size: 1210 kB
Accessories
Doors
To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.
ShowSide and rear panels
To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.
ShowModular Plinths
Plinths are aesthetic and stabilizing features for free-standing racks. They come in a standard height and are an alternative to adjustable feet and castors.
ShowDoor Locks
Racks equipped with doors always with lock system. This provides basic security for the equipment.
ShowElectronic door lock with built in card reader
An electronic door lock with the build-in card reader and door contact sensor enables to connect directly to the RAMOS Optimax or RAMOS Plus main units.
ShowElectronic Handle with Card Reader
Electronic handle with built in card reader for mounting directly onto a rack door.
ShowFace Recognition Reader with a Multi-format RFID Reader
The on-wall biometric reader for face recognition with a multi-format RFID reader.
ShowKeypad with Card Reader
Keypad with built-in card reader (EM format) for the RAMOS ACS access control system.
ShowRAMOS Optimax
Monitoring device suitable for multiple racks or server rooms with a height of 1U can monitor up to 150 sensors. Also available in GSM variant.
ShowRamos Plus
RAMOS Plus is the smallest model from the RAMOS range of intelligent monitoring devices.
ShowRamos Ultra
These monitoring devices with expanders allow you to connect up to 500 intelligent sensors. RAMOS Ultra also supports direct connection to GSM Modem, Modbus and many other standard Serial Communications Protocols.
ShowVertical Wire Management Panels—plastic
Vertical wire management panels are used for vertical cable management in free-standing racks, 800 mm wide.
ShowHorizontal HDWM
1 to 3U tall panels in one-sided or double-sided design for safe routing of the maximum number of patch cords to vertical panels.
ShowHDWM Extended Version with Longer Fingers
1 to 3U tall panels, for safe routing of the maximum number of patch cords to vertical panels. The extended version will allow almost a single capacity.
ShowVertical HDWM for RF1/Ri7/Ri7 Server Width 800mm
Vertical, high-density cable management panels for free-standing racks used for safe storage and connection of patch cords leading between horizontal panels.
ShowWire Management Panels with Metal Brackets
Fastening panels with metal brackets are used for horizontal management and routing of cables in a rack.
ShowWire Management Panels with Plastic Brackets
Fastening panels with plastic brackets are used for horizontal management and routing of cables in a rack.
ShowWire Management Panels with Plastic Ducts
Vertical wire management panels are used for horizontal cable management in free-standing racks as well as wall-mounting and SOHO racks.
ShowWire Management Panels with Plastic Brackets
10" wire management panels with plastic brackets for SOHO Mini REH
ShowHolders of Vertical Wire Management Panels and Brackets
Holders of fastening panels are used for the installation of vertical fastening panels and cable loops in free-standing racks 800mm wide.
ShowSide Cable Perforated Panels
Side perforated fastening panels are used for vertical cable routing in free-standing racks in the space between the front and rear 19" extrusions and the side panel.
ShowCable Basket Trays
The cable basket trays are used for cable routing in free-standing racks in the area between the front and rear 19" extrusions and the side panel
ShowBasic PDUs
The basic power distribution panels are used for power supply and its distribution to individual IT equipment in the racks.
ShowMonitored PDUs
The monitored power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet.
ShowManaged PDUs
The managed power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet including the ability to control the outlets.
ShowBrackets for vertical installation of PDU
For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.
ShowInline Meter
The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.
ShowLITE Ventilation Unit
Ventilation units are used for cooling low heat-dissipating equipment installed in a rack.
ShowHigh-end EC Fans
Fans are used for cooling low heat-dissipating equipment installed in a rack. Very low power consumption.
ShowVentilation Units with AC Fans
Ventilation units and fans are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.
ShowLED Light
Complete lighting units with rocker switch and inter-connection cables light up the interior of the FSE/FSM cabinet, option of connecting several light fixtures.
ShowFixed Lite Shelves with load rate up to 20 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
ShowFixed Shelves with Load Rate up to 60 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
ShowFixed High-Load Shelves with load rate up to 100 kg
Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.
ShowPull-out Shelves with load rate up to 25kg
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
ShowPull-out high load shelves
Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.
ShowDrawers and Holders
The holders are designed to support a keyboard or monitor. Drawings, technical documentation, etc., can be stored in the rack drawers.
ShowFiber-Optic Splice Box
Fiber-optic splice boxes are used for the termination and fiber slack management of fiber-optic cables within racks.
ShowPatch panels for KEYSTONE modules
Patch panels are mounted on the 19" vertical extrusions and allow cable termination.
ShowCastors and Feet
Conteg free-standing racks have a standard configuration with height-adjustable feet. The feet can be replaced by castors or plinths.
Show