Monitored PDUs
The monitored power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet.
Monitored power distribution units supply energy and its distribution to individual IT equipment in the racks, and enable remote monitoring of energy consumption—input metering and metering on each outlet (PDU versions with POM designation).
- Monitored PDUs measure voltage and frequency, allow reporting of the load power factor, active and apparent power, and energy consumption (in kWh).
- The device has an illuminated display located on the device or separately next to the power distribution unit, which is suitable for critical IT devices that require an uninterrupted power supply.
- The built-in web server enables the remote setting of the unit, reading the information, and management of the outlets of the specific PDU from a user-friendly web interface.
- Managed PDUs allow integrating into a CONTEG Pro Server monitoring system for central management or into a third party system (MIB table available).
- Hybrid access technology—Ethernet connectivity and serial communication; both interfaces can be accessed simultaneously and independently.
- PDUs are compatible with 19" IT racks.
- Placement in the rack—types for horizontal and vertical mounting. Test.
| Parametr | Value |
|---|---|
| Material | 1.5 mm anodized aluminum with a protective layer against oxidation with brackets made of stainless steel |
|
Dimensions |
Length: predefined by type, or can be adjusted for the configuration of choice Height: 65 mm Depth: 52.6 mm |
| Color | Black, red, blue, green, yellow, orange, white |
| Display | Illuminated LCD |
| Connection | 1-phase 230 V AC or 3-phase 230/400 V AC, 16 A or 32 A |
| Measurement | RMS value of current Voltage (V) and frequency Load power factor Total energy consumption True (W) and apparent power (VA) Measurement error <1% |
| Data bus | 2× RJ45 data bus RS-485 connectors |
| Ethernet | RJ45 connector TCP/IP 10/100 Mb/s, DHCP with back-up static IP, SNMP, Modbus, API |
| Sensor port | Option to connect temperature and humidity sensor |
| Operating temperature range | 0–60 °C |
| Protection | Unrestricted choice of fuse type including:
|
| Overvoltage protection | Optionally as a Hot Swap module |
| Power consumption | < 3 W |
PDU_datasheet_EN_20210901.pdf
File size: 1871 kB
pdu-WEB.jpg
File size: 75 kB
IP-SEI-318C36C932.jpg
File size: 41 kB
monitor-color-pdu.jpg
File size: 383 kB
monitored-pdu-3-web.jpg
File size: 65 kB
monitored-pdu-4-web.jpg
File size: 73 kB
PDU-colors.jpg
File size: 113 kB
program.jpg
File size: 75 kB
program1.jpg
File size: 354 kB
Catalog
Product Catalog—Data and Telecommunication Solutions and Racks
File size: 24466 kB
Brochure—Power Distribution Units (PDU) Managed, Monitored and Basic
File size: 1568 kB
Brochure—Complete Solutions for Datacenters
File size: 3003 kB
Brochure—Solutions for Server Rooms and Cabling Installations
File size: 1210 kB
Accessories
Inline Meter
The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.
ShowTemperature & Humidity Sensor
The sensor reads temperature and humidity inside the IT rack. It connects via a 2.5 m cable directly to a monitored or managed PDU.
ShowOutput Power Cables
Output power cables are used for transmitting electrical energy between the PDU and an IT device inside the IT rack.
ShowInput Power Cables
1-phase 16 A monitored and managed PDUs are supplied without a lead-in cable.
ShowBrackets for vertical installation of PDU
For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.
Show