FSM— sheet steel, integrated side panels
Sheet steel free-standing enclosure with side panels integrated in the frame with 700 kg of load-bearing capacity.
FSM free-standing cabinets are made of sheet steel with side panels integrated in the frame and will withstand even the most demanding industrial facilities.
The compact welded construction of the enclosure is made of profiled side panels joined together by crossbar profiles. This manufacturing method can meet the highest requirements for rigidity and lends the cabinet 700 kg of load-bearing capacity. Thanks to the design of the bottom frame, FSM can be used even without a extra plinth.
To create a variety of mounting surfaces and planes, we offer a wide range of system accessories designed for optimal use of the frame profile. We also supply components to control the environment inside the enclosure, such as heating units, filtered fans or active cooling units.
MAIN ADVANTAGES:
- Welded construction with integrated side panels
- Load capacity 700 kg
- Single-door and double-door enclosures designs
- Can be installed without an additional supporting plinth
- Designer lift-up handle—the standard for all enclosure types
- Easy to close doors thanks to a special locking system
- Maximum use of interior space—possibility of placing the mounting plate between the rear posts
- Side panels integrated in the frame
- 28 sizes from 1 400 × 600 × 300 mm up to 2 000 × 1 600 × 500 mm
- Wide assortment of accessories
- Wide assortment of tailor-made customer solutions—cut-outs according to your requirements before and after final surface finishing accessories
RECOMMENDED ACCESSORIES:
| Parameter | Value |
|---|---|
| Enclosure material | Sheet steel |
| Mounting plate material | Zinc-plated sheet steel |
| Enclosure surface finish | Epoxipolyester-powder coat |
| Color | RAL7035 for indoor use |
| Protection degree | IP55 according to the EN 60529 norm (the degree of protection can be reduced after mounting some accessories) |
| Mechanical protection | IK10 according to IEC 62262 |
| Supply includes | Welded construction with integrated side panels Full door with swing handle (single-door/two-door); the doors are equipped with a four-point locking system The door hinges are located on the right-hand side of the single-door cabinet (option to switch the door mounting from right to left is available) Rear and top panel Multi-part gland plate Mounting plate with raster |
FSM_datasheet_EN_20220624.pdf
File size: 1687 kB
FSM-201004+301204_WEB.jpg
File size: 79 kB
FSM-201004_main-WEB.jpg
File size: 54 kB
FSM-201004_opened-WEB.jpg
File size: 168 kB
FSM-201004_back-WEB.jpg
File size: 66 kB
FSM-301204_main-WEB.jpg
File size: 59 kB
FSM-301204_opened-WEB.jpg
File size: 194 kB
FSM-301204_back-WEB.jpg
File size: 69 kB
Catalog
Product Catalog—Industrial Cabinets
File size: 39148 kB
Catalog
Product Catalog—Outdoor Cabinets
File size: 15053 kB
Brochure—Industrial Cabinets
File size: 2055 kB
Brochure—Outdoor Cabinets
File size: 1868 kB
Accessories
Horizontal and vertical rails
Perforated mounting rails to create additional mounting positions
Show19" Swing frame
To create a tilting 19” plane and access to the rear of the 800 mm wide cabinet
ShowDoor switch
The switch is used to automatically switch on/off of the installed components such as lights, fans, cooling units.
ShowSide Brackets For Mounting Plates
The brackets are used for additional mounting plate fixation and vibration reduction into FSM and FSE cabinets.
ShowLocks and Lock Inserts for FSE/FSM
Spare inserts instead of the standard 5 mm double-bar in the FSE and FSM enclosures.
ShowLED Light
Complete lighting units with rocker switch and inter-connection cables light up the interior of the FSE/FSM cabinet, option of connecting several light fixtures.
ShowSafety warning signs
Choose safety warning signs from our standard portfolio or we can produce it according to specific requirements.
ShowFilter Fans
Forced ventilation fans maintain the correct temperature inside the cabinet by exchanging heated inside air for cool outside air.
Show