iSEVEN Flex RM7—Free-Standing Rack | CONTEG

iSEVEN Flex RM7

Designed for users whose space constraints do not allow for the installation of rack series iSEVEN (RI7) with welded construction.

The iSEVEN Flex RM7 racks was designed for users whose space constraints do not allow for the installation of rack series iSEVEN (RI7) with welded construction. These racks are known for their unmatched balance between price, utility value, and quality. The iSEVEN Flex racks are delivered unassembled for easy transportation to the installation site where they can be built quickly and easily.

This type of rack is the ideal choice for installers and end-users who want to spend less time choosing between various options and configuring difficult product part numbers. After thorough research, we have prepared for you a list of the most common sizes that fit one universal design.

The iSEVEN Flex enclosure is ideal for network equipment rooms, telecommunication closets, and computer rooms when special configurations for load ratings, cable entries, or door/panel options are not critical. The number of options is balanced by a highly competitive price and excellent availability.

MAIN ADVANTAGES:

  • Universal rack for standard daily use
  • Unassembled version for transport to inaccessible spaces

Parameter Value
Height 21, 27, 42, 45U
Width 600 or 800 mm
Depth 600, 800, or 1 000 mm
Construction Robust frame construction joined together with M6 screws, easy and quick assembly, delivered unassembled; assembly at the installation site
Load rating 800 kg
Doors 2 types of doors (type G or S) for front and rear installation and 1 type of rear panel, door opening angle 180°, can be easily changed to open on right or left, swivel handle lock – DIN profile, universal key 333
Side panels Easily removable with lock
Top and bottom plates Holes for ventilation unit and cable entries. The number of holes depends on the selected footprint
Extrusions 2 pairs of sliding 19" L-type extrusions
IP rating IP30
Colors RAL7035 a RAL9005
Standard configuration

Top and bottom covers, 4 columns

2 pairs of 19" sliding vertical extrusions

2 or 3 pairs of vertical extrusion holders

Front door with swivel handle lock—DIN profile, universal key 333, and safety glass (EN 12150-1)

Removable rear panel with knock-out cable entry and lock

1 pair of sheet steel side panels with locks

4 adjustable feet, GND/earthing kit

28× mounting kits

Information Rack is delivered unassembled inboxes
Datasheet

iSEVEN-Flex-RM7_datasheet_CONTEG-20230419_en.pdf

File size: 2255 kB

Other versions ru CZ de fr
Manuals

ASSEMBLY_AND_OPERATING_MANUAL_iSEVEN_Flex_RM7.pdf

File size: 4904 kB

Manuals

iSEVEN-Flex-RM7_datasheet_EN_20210812.pdf

File size: 835 kB

Stencils

rm7v2000.zip

File size: 4326 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_main-web.jpg

File size: 259 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_main-opened-web.jpg

File size: 305 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_top-web.jpg

File size: 366 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_wide-web.jpg

File size: 475 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_bottom-web.jpg

File size: 496 kB

Image

iSEVEN-Flex-RM7_RM7-42-80_100-X.jpg

File size: 185 kB

Image

iSEVEN_RM7-42-80_100-front-right-web.jpg

File size: 89 kB

Image

iSEVEN_RM7-42-80_100-right-back-two-web.jpg

File size: 76 kB

Image

iSEVEN_RM7-42-80_100-right-back-web.jpg

File size: 71 kB

Image

iSEVEN_RM7-42-80_100-back-right-web.jpg

File size: 86 kB

Image

iSEVEN_RM7-42-80_100-left-front-two-web.jpg

File size: 91 kB

Image

iSEVEN_RM7-42-80_100-handle-hinges-web.jpg

File size: 204 kB

Image

iSEVEN_RM7-42-80_100-from-inside-top-web.jpg

File size: 211 kB

Image

iSEVEN_RM7-42-80_100-from-inside-extrusions-web.jpg

File size: 253 kB

Image

iSEVEN_RM7-42-80_100-from-inside-bottom-web.jpg

File size: 240 kB

Image

iSEVEN_Flex-RM7-42-80_80-H_main-splitdoors.jpg

File size: 313 kB

Catalog

Product Catalog—Data and Telecommunication Solutions and Racks

File size: 24466 kB

Brochure

Brochure—Complete Solutions for Datacenters

File size: 3003 kB

Brochure

Brochure—Solutions for Server Rooms and Cabling Installations

File size: 1210 kB

Accessories

Vertical Extrusion

A unique combination of 19" extrusions, with many advantages.

Show

Doors

To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.

Show

Side and rear panels

To access the content, racks are fitted by doors or rear panels and side panels. The customer can choose between 15 types of cladding.

Show

Modular Plinths

Plinths are aesthetic and stabilizing features for free-standing racks. They come in a standard height and are an alternative to adjustable feet and castors.

Show

Door Locks

Racks equipped with doors always with lock system. This provides basic security for the equipment.

Show

Electronic Handle

Electronic handle for mounting directly onto a rack door.

Show

Electronic door lock with built in card reader

An electronic door lock with the build-in card reader and door contact sensor enables to connect directly to the RAMOS Optimax or RAMOS Plus main units.

Show

Electronic Handle with Card Reader

Electronic handle with built in card reader for mounting directly onto a rack door.

Show

Face Recognition Reader with a Multi-format RFID Reader

The on-wall biometric reader for face recognition with a multi-format RFID reader.

Show

Keypad with Card Reader

Keypad with built-in card reader (EM format) for the RAMOS ACS access control system.

Show

RAMOS Ultra ACS

The main control and monitoring unit of the access control system RAMOS ACS.

Show

Ramos Micro

RAMOS Micro is a simple small solution for monitoring the environment.

Show

RAMOS Optimax

Monitoring device suitable for multiple racks or server rooms with a height of 1U can monitor up to 150 sensors. Also available in GSM variant.

Show

Ramos Plus

RAMOS Plus is the smallest model from the RAMOS range of intelligent monitoring devices.

Show

Ramos Ultra

These monitoring devices with expanders allow you to connect up to 500 intelligent sensors. RAMOS Ultra also supports direct connection to GSM Modem, Modbus and many other standard Serial Communications Protocols.

Show

Vertical Wire Management Panels—plastic

Vertical wire management panels are used for vertical cable management in free-standing racks, 800 mm wide.

Show

Horizontal HDWM

1 to 3U tall panels in one-sided or double-sided design for safe routing of the maximum number of patch cords to vertical panels.

Show

HDWM Extended Version with Longer Fingers

1 to 3U tall panels, for safe routing of the maximum number of patch cords to vertical panels. The extended version will allow almost a single capacity.

Show

Vertical HDWM for RF1/Ri7/Ri7 Server Width 800mm

Vertical, high-density cable management panels for free-standing racks used for safe storage and connection of patch cords leading between horizontal panels.

Show

Wire Management Panels with Metal Brackets

Fastening panels with metal brackets are used for horizontal management and routing of cables in a rack.

Show

Wire Management Panels with Plastic Brackets

Fastening panels with plastic brackets are used for horizontal management and routing of cables in a rack.

Show

Wire Management Panels with Plastic Ducts

Vertical wire management panels are used for horizontal cable management in free-standing racks as well as wall-mounting and SOHO racks.

Show

Wire Management Panels with Plastic Brackets

10" wire management panels with plastic brackets for SOHO Mini REH

Show

Holders of Vertical Wire Management Panels and Brackets

Holders of fastening panels are used for the installation of vertical fastening panels and cable loops in free-standing racks 800mm wide.

Show

Side Cable Perforated Panels

Side perforated fastening panels are used for vertical cable routing in free-standing racks in the space between the front and rear 19" extrusions and the side panel.

Show

Cable Basket Trays

The cable basket trays are used for cable routing in free-standing racks in the area between the front and rear 19" extrusions and the side panel

Show

Basic PDUs

The basic power distribution panels are used for power supply and its distribution to individual IT equipment in the racks.

Show

Monitored PDUs

The monitored power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet.

Show

Managed PDUs

The managed power distribution units enable remote monitoring of energy consumption (input metering) and metering on each individual outlet including the ability to control the outlets.

Show

Brackets for vertical installation of PDU

For vertical installation of a power distribution unit into IT rack, it is necessary to order the appropriate bracket for basic, monitored and managed PDUs, which is not included in the package.

Show

Inline Meter

The 1-phase or 3-phase inline power meter with an illuminated display is designed for measuring parameters on the lead-in cable to basic PDUs and is easy to connect into existing circuits.

Show

LITE Ventilation Unit

Ventilation units are used for cooling low heat-dissipating equipment installed in a rack. 

Show

High-end EC Fans

Fans are used for cooling low heat-dissipating equipment installed in a rack. Very low power consumption.

Show

Ventilation Units with AC Fans

Ventilation units and fans are used for cooling low heat-dissipating equipment installed in a rack. For medium and high thermal loads, we recommend air-conditioning units from our Targeted Cooling portfolio.

Show

LED Light

Complete lighting units with rocker switch and inter-connection cables light up the interior of the FSE/FSM cabinet, option of connecting several light fixtures.

Show

Fixed Lite Shelves with load rate up to 20 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Fixed Shelves with Load Rate up to 60 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Fixed High-Load Shelves with load rate up to 100 kg

Fixed shelves are designed for placing equipment that is not 19" mountable. The entire area of the shelves is perforated to ensure efficient ventilation.

Show

Pull-out Shelves with load rate up to 25kg

Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.

Show

Pull-out high load shelves

Pull-out shelves offer safe support for equipment that does not have mounting possibilities. The telescopic design make it easy to access the equipment.

Show

Drawers and Holders

The holders are designed to support a keyboard or monitor. Drawings, technical documentation, etc., can be stored in the rack drawers.

Show

Fiber-Optic Splice Box

Fiber-optic splice boxes are used for the termination and fiber slack management of fiber-optic cables within racks.

Show

Patch panels for KEYSTONE modules

Patch panels are mounted on  the 19" vertical extrusions and allow cable termination.

Show

Patch Panels for SOHO Mini REH

3 type of patch panels.

Show

Fastening and earthing bars for patch panels

CONTEG racks include a standard earthing kit.

Show

19" panels with earthing bar

Conteg racks include a standard earthing kit.

Show

Earthing bars

Conteg racks include a standard earthing kit.

Show

Castors and Feet

Conteg free-standing racks have a standard configuration with height-adjustable feet. The feet can be replaced by castors or plinths.

Show

Mounting Kit

The mounting kit is used to mount the equipment to the vertical extrusions.

Show

Fasteners

Cage nuts, screws, hinge, pull-out brackes, fasteners.

Show